Our vacancies

Provide project management and leadership for the successful delivery of the Stay-Cable Projects within the scope of VSL VIETNAM, including but not limited to:
·       Thorough understanding of the project management requirements for leading the stay-cable bridge projects, including the ability to properly scope and manage projects to established metrics for schedule and profit.
·       Monitoring of overall site construction with the view of forecasting problems for their prevention.
·       Close monitoring of all potential cost and time variations to the contracts
·       Taking appropriate actions to ensure compliance to the company’s internal procedures and Quality, Health, Safety and Environment’s instruction and regulations of the Country and the Group.
·       Responsible for the budget and cost control.
·       Preparation and control of the Project HSE Plan, Project Quality Plan, and Method Statements
·       Preparation of work orders and subcontracts in general
·       Material ordering and delivery arrangements and management.
·       Site Management
·       Liaise with the Production and Workshop Manager for production and plant services.
·       Vendor assessment and control

Dragages Hong Kong is looking for its future Methode Engineer to work them.

The Methods Engineer will be responsible for:
- Producing site installation plans taking into account; Construction team needs and environmental constraints;
- Keeping site installation plans up-dated making sure that all the available and relevant information (eg. temporary works design, permanent design when appropriate,…) are included;
- Producing sequence drawings. High level sequence and detailed sequence to check whether the envisaged work sequence is workable and communicate efficiently with the construction team who decide on the work methods;
- Producing temporary works drawings for construction based on the design/guidelines of the methods engineer and/or temporary works engineer (eg. Formwork, pad foundations, lifting plan,…);
- Producing Consents drawings to address Consents team needs;
- Satisfying CAD standards to ensure the required quality of drawings is achieved;
- Taking off quantities from temporary and permanent design drawings;
- Extracting information from 3D models (Revit models);
- To fulfil Health & Safety responsibilities by adhering to the Company's Health & - Safety Policy and Management Plans;
- To comply with all Company's Policies and Procedures;
- To undertake other such reasonable duties appropriate to the role.

Bouygues Travaux Publics is looking for a planning engineer to join its solar farm project in Australia.
The project will be developed in Carwarp, approximately 20 minutes south of Mildura. The project is planned for deployment at a site that has existing approvals for a solar farm. The project requirements fit within the scope of those approvals.
Your main responsabilities:
Ensure that the project is planned such that the time aspects of the project are controlled thus optimising resources and minimising construction costs;
Prepare, maintain and track project Baseline programs and in-house target programs;
Ability to communicate the programs to the workforce level;
Prepare project and management dashboard planning reports;
Develop, implement, and maintain project controls procedures;
Tracking critical path and highlighting flags with the project manager;
Attending and scheduling meetings as required;
Monitoring and tracking project progress and writing up reports;
Meticulous record keeping and data management abilities.
Track the actual productivities against the planned benchmarks;
Understanding and meeting all contract requirements;
Continuous communication with managers, supervisors, and the rest of the team.

Bouygues TP's project 1201 in Hong Kong involves the construction of the Liantang tunnel. It involves the design of two motorway tunnels, a ventilation structure and an administrative building using excavation techniques.

Scope of the works:
TCC works
-OVH Crane assembly and commissioning:
• Assembly to be followed up with the supplier.
• Site acceptance test to be followed-up with the supplier.
 Deliverables: full reports of assembly and SAT with photos and planning.
-Excavation works plant supply (Dewatering/piping/Ventilation follow up):
• Coordination with Method team and Procurement team to define sites installations for each sequence of excavation.
• Deliverables: Report of good adequation of works compared to method statement.
-Preparing STP assembly:
• Preparing documentation to follow up the STP assembly works (Detailed planning with manhours and logistic)
 Deliverables: Full detailed expected planning of works
TCA works (From March to May)
-STP Assembly follow up:
• Follow up the STP assembly.
 Deliverables: Weekly reports and as-built detailed planning compared to the expected planning.sur

Bouygues Travaux Publics is working in the ALIGN Joint Venture for the High Speed 2 project in London. ALIGN is currently delivering a section of the 175km High-speed rail line between London and Birmingham. Works undertaken by ALIGN comprise of a 3.4km long viaduct and a twin bore 16km tunnel.
The Site Engineer Quality will ensure that the teams comply with ITPs, Method Statements, Work processes & procedures and Safety Standards across the project.
Ensure that the teams have requisite documents developed, approved and distributed prior to works commencement, undertake and record inspections and tests defined within ITPs, maintain contemporaneous as-built drawings, raise NCRs to cover deficient works and RFIs to clarify issues and/or record technical decisions agreed with HS2.
Responsibilities
The Align JV Site Engineer - Quality will be responsible for:
• Undertake Site Surveillance in conjunction with Surveillance Manager
• Daily execution and recording of self-certification of works against ITPs, method statements and plans
• Collection, collation, review and reporting
• Expediting the timely close-out of areas of concern
• Ensuring the issue of NCRs by construction teams, as necessary

Bouygues Travaux Publics (TP) and Laing O’Rourke, two of Europe’s most dynamic engineering and construction specialists, are working together in a joint venture named BYLOR to deliver the main civil engineering works at Hinkley Point C (HPC) worth over £2.8 billion.

Bylor are pushing the boundaries of innovation and modern technology while delivering high quality construction on a massive scale. Bylor have already broken the UK record for the largest continuous concrete pour of 9,000m3 of concrete.

This is great opportunity to be part of a dynamic organisation that is challenging the industry and making history.

This specific role is situated within the Pools, Tanks and Liners organisation and will involve management of a Tier 2 company (Framatome). This Tier 2 is responsible for the fabrication and installation of Stainless-Steel components for the RPE Sumps, RBS Tanks, RRI Tanks and IRWST Pools across site. This is a challenging role within a high-pressure environment where no two days are the same and presents a great opportunity for growth and personal development.

Purpose of the role :
Assisting the Project Manager with
• planning and reporting requirements
• managing / coordinating daily site activities for assigned work packages within a designated area
• Being the coordinator of all interfaces : gathering the needs / requirements of all parties to ensure construction activities are delivered safely and in accordance with client cost, time, quality and scope requirements.

Key responsibilities and specific accountabilities:
• Review the method statements and risk assessments and ensure these are implemented/followed during the production.
• Creation and review of VTS
• Ensures that appropriate as built surveys are undertaken, correctly recorded and communicated.
• Follow up on Non- Conformance Reports (NCR) / Request For Information (RFI) / Field Change Request (FCR)
• Implements the Inspection and Test Plan (ITP) ensuring that evidence and witness sign off is achieved at every step
• Ensures quality records are created by the Tier 2 in line with production and co-ordinates reviews by BYLOR and NNB.
• Supports the resolution of issues identified by BYLOR Surveillance team
• Carries out quality control checks using internal check sheets where appropriate
• Adopts and promotes a culture of ‘right first time’
• Files and maintains the engineer’s drawings and specifications so that the current information is always available.

What’s the team like?
VSL is an international specialist construction company with a worldwide footprint. The main objective of our Production team in Bern/Switzerland is to support our customers in the realization of their projects and to provide them with strong technical expertise and added value. We strongly believe in preserving our built environment to reduce the carbon footprint of the infrastructure sector and we see innovative engineering and high-quality execution as the key to that. Together, we work in a multidisciplinary environment to improve our technologies and develop new, optimized and differentiating solutions. Our engineering teams combine civil, structural, mechanical and data science skills. We operate with multinational teams and aim to strongly advance gender diversity. To strengthen our execution teams, we are looking for a Post-Tensioning (PT) Site Supervisor for the German and Austrian markets.
How will you make an impact?
As a Post-Tensioning (PT) Site Supervisor, you will work on specific international projects and mainly in Germany and Austria, in order to support our clients in the realization of their projects. Your responsibilities will be:
Participate in the preparation and organization upstream of the project, plan and order the delivery of needed materials and requests of the need of labor
Supervise the installation of the site and the equipment required for the project
Supervise, lead and organize the work of on site: work reports, relationship/coordination with client, communication with project manager, quality of the production, and safety standards, etc.
Supervise the work of the local staff: hiring of helpers, teaching, control of quality and assure the safety for our scope of works
Ensure Health & Safety rules are respected (regular inspections)

What’s the team like?
VSL is an international specialist construction company with a worldwide footprint. The team in our Technical Centre in Bern/Switzerland is mainly focused on providing support and technical competence to our business developers, our site engineers and to offer a strong added value to our customers. We strongly believe in preserving our built environment to reduce the carbon footprint of the infrastructure sector and we see innovative engineering and high-quality execution as the key to that. Together, we work in a multidisciplinary environment to improve our technologies and develop new, optimized and differentiating solutions. Our engineering teams combine civil, structural, mechanical and data science skills. We operate with multinational teams and aim to strongly advance gender diversity.
 
How will you make an impact?
Involved in the Technical Center in Switzerland, we have the possibility to discover our activities in design, methods and stay-Cable

Preparation of calculation note and design reports, method documents (method statement, kinematics, general arrangement…)

Follow-up and participation in the development of our various projects: post tensioning structure (building and bridges), construction engineering including methods

Cooperation with the production, the business Developer to develop project-related solutions and participation in cross-functional projects

What’s the team like?

VSL is an international specialist construction company with a worldwide footprint.
Together, we work in a multidisciplinary environment to improve our technologies and develop new, innovative solutions. You will work in a diverse and multinational team.
VSL is looking for a Senior Method Engineer to work within the Ground Engineering Business Line in Asia Pacific region.

How will you make an impact?
Main responsibilities:
Reports to Design- or Deputy Design Manager
Prepares Method Documents / Method Drawings and  Method Statements for pre-tender, tender and ongoing projects with emphasis on Ground Engineering (D-wall, Drilling, different methods of Ground Treatment)
Prepares Site Setup / Plant / Equipment Layout drawings at start of projects
Coordinates with Production team and Plant
Carries out technical reviews
Carries out productivity analysis and data base studies
Collects, monitors and maintains relevant production data for data base
Supervises allocated Technical Resources
Supervises production of detailed drawings

What’s the team like?
VSL is an international specialist construction company with a worldwide footprint.
Together, we work in a multidisciplinary environment to improve our technologies and develop new, innovative solutions. You will work in a diverse and multinational team.

VSL is looking to appoint a Ground Engineering Estimator to support our tender studies in European region.
The key duty of the role is to create work winning offers in accordance with VSL’s strategy and guidance.
This role works closely with other members of the preconstruction team and will be supported by the preconstruction manager and commercial manager.
The successful candidate will be a good planner and able to manage their own workload and work well within a team.
The role is primarily based at Becket House, VSL’s central London location but may require travel.

How will you make an impact?
Main responsibilities:
Ensure all tender correspondence is recorded and logged
Ensure all proposals and estimate deadlines are met
Review contents of tender documentation and provide feasibility advice
Prepare and submit tender queries / clarifications
Prepare bills of quantities / schedule of rates for tender applications and 1st principle estimates
Preparing detailed proposals ensuring client guidelines and specifications are adhered to
Ensure estimates and offer take adequate account of applicable legislation and recognised industry standards on health, safety, quality and environment.
Participates in the value engineering/choice of alternatives during the preparation of the bid.
Leads and coordinates the projects with the Bid Manager, the preconstruction Manager and the commercial manager.
Co-ordinate the tender preparation documents submitted by other departments, ensuring that they adequately address the client's requirements.
Studies technical, legal and financial aspects and puts forward a commercial strategy.
Takes part in the negotiation of bids but not the signing.
Prepare and submit subcontract enquiries in line with company processes
Review subcontract tender submissions for compliance and inclusion into the estimate
Seeks out and targets future business, prospects for and obtains a loyal client base.
Looks for new markets and new partners.
 

What’s the team like?
VSL is an international specialist construction company with a worldwide footprint.
Together, we work in a multidisciplinary environment to improve our technologies and develop new, innovative solutions. You will work in a diverse and multinational team.
VSL is looking for a Business Development Manager to work in Sydney within our VSL Australia teams.
How will you make an impact?
Main responsibilities:
1.     Profitability of VSL Australia
- The profitability of VSL Australia (job procurement) in accordance with agreed principles of tender allowances, operations, programmes, overhead and operational budgets
 
2.     Tendering Operations
 
- Preparation of tenders, budgets and reports as may be required.  Ensure Project costs and conditions are reviewed at time of handover to the Operations/Project Manager.  Advise Managers of significant changes.  Ensure contract documents are reviewed and signed before project commencement
- Conduct inspections as necessary to assist with tendering function.
- Management of marketing activities.
This includes:
·       Maintain awareness of market situation
·       Liaise with Clients to maintain and build awareness of the company
·       Negotiate with Clients
·       Obtain approval of tender submissions
·       Assist Operations department with management of additional works, variations
 - Participate in monthly VSL BDM Meetings, Management Review and Objective Meetings involving all key VSL personnel
-        Attendance at Project Point Reviews
-        Develop detailed estimate for Civil Works Projects (predominantly focused on bridge construction/ Heavy Lift).

3.     Human Resource Management

- Work with General Manager and Human Resources in staff planning, resourcing levels.
Plan and monitor BDM department resource levels
- The building and development of teamwork.  Encouraging high levels of staff performance and motivation
 
4.     Marketing & Sales
 
- The initiation and development of new business opportunities in areas of the company's existing technologies and other related fields.  In particular this includes the securing of bridge construction works, prime contractor works, project and construction management assignments, other activities in civil engineering and other specialist activities
- Be aware of the other opportunities for VSL works and advise other BDM’s accordingly
 
5.     Training
 
-        Ensure that training requirements and plans are being met

6.     Limits of Authority
-        Refer to VSL Limits of Authority procedure

VSL ist ein internationales Spezialbauunternehmen mit weltweiter Präsenz. Das Hauptziel ist unsere Kunden bei der Umsetzung ihrer Projekte zu unterstützen und ihnen mit starker technischer Expertise und Mehrwert zur Seite zu stehen. Wir sind überzeugt, dass die Erhaltung unserer gebauten Umwelt ein entscheidender Ansatz ist, um den CO₂-Fußabdruck des Infrastruktursektors zu reduzieren, und wir sehen innovative Technik und qualitativ hochwertige Ausführung als Schlüssel dazu. Gemeinsam arbeiten wir in einem multidisziplinären Umfeld an der Verbesserung unserer Technologien und der Entwicklung neuer, differenzierender Lösungen. Unsere Ingenieurteams vereinen das Wissen und die Erfahrung von Bauingenieuren, Maschinenbauingenieuren und Data-Scientists. Wir arbeiten mit multinationalen Teams und streben eine starke Förderung der Diversität an. Zur Verstärkung unseres Produktionsteams in Subingen suchen wir ein(e) Lager und Produktionsleiter-in.

Wie werden Sie etwas bewirken?
Als Logistik und Produktionsleiter-in arbeiten Sie in unserem Schweizer Produktionsteam und mit unserer Schwesterfirma VAS AG. Ihre Verantwortlichkeiten werden wie folgt aussehen:
Organisation der Produktionslinie, Lagerverwaltung und Versorgung.
Beaufsichtigung der täglichen Produktionsabläufe, um die Einhaltung der Fristen und Qualitätsstandards zu gewährleisten
Sicherstellung der Anwendung von Sicherheitsstandards und Gesundheits- und Sicherheitsvorschriften am Arbeitsplatz
Leitung eines Teams von ca. 10 Personen und Teilnahme an der Entwicklung der Kompetenzen der bestehenden Teams
Koordination und Abwicklung von Bestellungen und Produktionsaufträgen mit dem Team
Supervision der externen und internen Transporte mit unseren Partnern
Mitgestaltung einer neuen Produktionsanlage (Neubau der Produktions- und Büroräumlichkeiten)

What’s the team like?
VSL is an international specialist construction company with a worldwide footprint. The main objective of our Production team in Bern/Switzerland is to support our customers in the realization of their projects and to provide them with strong technical expertise and added value. We strongly believe in preserving our built environment to reduce the carbon footprint of the infrastructure sector and we see innovative engineering and high-quality execution as the key to that. Together, we work in a multidisciplinary environment to improve our technologies and develop new, optimized and differentiating solutions. Our engineering teams combine civil, structural, mechanical and data science skills. We operate with multinational teams and aim to strongly advance gender diversity.

How will you make an impact?
Support in the technical preparation of post tensioning and stay cables projects (building and bridges) with your manager
Participation in the follow-up of the fitters during the execution phase of the projects
Support in controlling costs, deadlines, quality and safety
Cooperation with the technical center to develop project-related solutions and participation in cross-functional projects

What's the team like ? 
VSL is an international specialty construction company with a global presence. The main objective of our Finance & Controlling team in Bern/Switzerland is to support our internal partners with financial knowledge and to oversee the budget controls for our various projects. We believe that preserving our built environment is a critical approach to reducing the carbon footprint of the infrastructure sector, and we see innovative engineering and high-quality execution as key to this. Together, we work in a multidisciplinary environment to improve our technologies and develop new, differentiating solutions. Our engineering teams combine the knowledge and experience of civil engineers, mechanical engineers, and data scientists. We work with multinational teams and strive to strongly promote diversity.

How will you make an impact ?
Responsible for financial accounting in accordance with Swiss law and corporate policies
Quarterly consolidation and reporting to management
Lead, drive and coordinate annual financial and other audits
Direct and indirect taxes declarations
Preparation and filing of annual corporate tax (with support of tax consultant)
Advise on VAT chain transactions, triangulations, intra-community deliveries
Collaborate with teams to manage cash and monitor all bank accounts
Close follow up of intercompany, payroll, inventory, fixed asset, and other accounts
Coordination with Account Payables and Treasury teams at shared service center
Participate in IT projects-digitalization
Continually review and update accounting procedures to ensure compliance
Assist in ad hoc requests by management and business partners.

VSL International is looking for a Continuous Improvement Officer to deploy our Lean management approach in VSL on projects and departments and to help establishing Lean Management culture in the company.
Your duties will be as following :
To raise awareness of continuous improvement culture among all staff in VSL
Animate / follow VSL project 
Support administrative task
Collect data for the database (project or department targets, improvement, gain, lessons learnt….)
Share and communicate about our lean management program (Be+) achievement on project
Work with
- Communication department
- Business lines for knowledge consolidation, productivity, competitiveness, Quality
- External consultant
Travelling on site if required

What’s the team like?
VSL is an international specialist construction company with a worldwide footprint. Our team in Praha has a focus on the repair, preservation and maintenance of existing structures, but also supports our new build businesses. Together, we work in a multidisciplinary environment to improve our technologies and develop new, innovative solutions. You will work in a diverse, multinational team with civil and mechanical engineers.
How will you make an impact?
Preparation, management and implementation of projects in terms of technical, organizational and contractual aspects
The candidate will be part of the existing production department, working closely with the Production Director, the on-site execution team and company management

What’s the team like?

VSL is an international specialist construction company with a worldwide footprint.
Together, we work in a multidisciplinary environment to improve our technologies and develop new, innovative solutions. You will work in a diverse and multinational team.
You will be working under senior design management team part of the overall technical team (design, methods, temporary works, BIM). The position is located in our head office in Chennai.

How will you make an impact?

• Responsible for design of Temporary works for bridge construction.
• Supervise / review / update production of detailed drawings
• Coordinate with production team and technical team (methods, BIM, other interfacing design managers) to develop the design or modification of the design during construction
• Preferably, able to carry out design of temporary structures such as steel false work/ precast moulds, steel frames,  temporary platforms, lifting frames, foundation design for supporting temporary structures
• At a minimum, able to carry out design checks in the design submission (check of the assumption, design approach, conclusion) and to summarize the requirements to the production team for a streamline site implementation